INSTRUCTIONS FOR APPLYING OFFICIAL IRON-ON PATCH:
DO NOT USE LOW MELTING FABRICS
DO NOT STEAM IRON
DO NOT APPLY HOT IRON DIRECTLY TO EMBROIDERED AREA
1.All garments should be freshly laundered.
2.Set iron to Cotton setting or 400 degrees.
3.Thoroughly iron area of garment where patch will be placed.
4.Place patch on desired location of garment.
5.Place cloth or light towel over patch. While using a slow circular motion, press firmly for 30 seconds.
6.Turn garment inside out, then iron back of patch for 30 seconds.
7.Let patch area cool for one minute. If edge of patch can be lifted, repeat step six